HP 54602B Digital Oscilloscope 150MHz 4-Channel

$349.00

HP 54602B Digital Oscilloscope 150MHz 4-Channel

This is a used item – normal wear and tear can be expected. It comes as shown in the picture and with a power cord, nothing else is included. THE BUTTON FOR BRIGHTNESS ADJUSTMENT IS MISSING AS YOU CAN SEE IN THE PICTURE. Powers on and performs self-tested, no other testing is done. However, it has 30-days warranty and guaranteed against DOA.

Out of stock

SKU: HP 54602B Category:

Description

The Agilent 54602B oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

The Agilent 54602B oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

For a high-quality scope when your needs go past 100 MHz, take a closer look at the Agilent 54602B. You get the same capabilities as the other Agilent 54600- series scopes, with the added advantage of 150 MHz bandwidth and 1 mV/div sensitivity

Performance Characteristics of the 54602B

  • Form Factor :Benchtop
  • Bandwidth :150 MHz
  • Number of Channels :4 ch
  • Simultaneous Channels :2 ch
  • Simultaneous Maximum Sampling Rate/ch :20 MSa/s
  • One ch. only max. sampling rate :20 MSa/s
  • Max. Single Shot bandwidth :2 MHz
  • Max. Record Length :4000 pt/sec
  • Min. Vertical Sensitivity :1 mV/div
  • Maximum Vertical Sensitivity :5 V/div
  • Rise time :2.33 ns
  • Number of Bits :8 bits
  • Input Impedance :1 MOhm
  • Input Coupling :AC,DC,GND
  • Maximum Input Voltage :400 Vrms
  • Main time base – lowest :2 ns/div
  • Main time base – highest :5 s/div
  • Timebase accuracy :0.01 %
  • Trigger Source :Internal
  • Trigger Modes :Auto,Single,Trigger,TV
  • Minimum Trigger Holdoff :200 ns
  • Trigger Sensitivity 3.5 mV
  • Minimum Glitch Trigger :1 ns
  • Display Type :CRT Monochrome
  • Display Size :17.78 cm
  • Height: : 6.77 in(.26 in)
  • Length: 12.48 in(.49 in)
  • Weight: 13.67 lbs(30.13 lb)

Reviews

There are no reviews yet.

Be the first to review “HP 54602B Digital Oscilloscope 150MHz 4-Channel”

Your email address will not be published. Required fields are marked *