Crown CTs 600 Two-channel, 300W Power Amplifier

$299.00

Crown CTs 600 Two-channel, 300W Power Amplifier

This is a used item – normal wear and tear can be expected. It comes with a power cord, nothing else is included. No cables

Out of stock

SKU: Crown CTs 600 Category:

Description

Overview ::

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

Features :

 

  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • Crown Switching Power Supply for lighter weight
  • Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· “FIT” (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Comprehensive array of indicators provide accurate diagnostics
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules. Specifications:
  • Channels ; 2
  • Sensitivity :1.4 V
  • Signal to Noise Ratio (below rated power : 20 Hz to 20 kHz, A-Weighted) 105 dB THD (full rated power, 20 Hz – 20 kHz) < 0.1%
  • Damping Factor :(10 Hz to 100 Hz) Frequency Response (at 1W, 4/8 ohms) : +/- 0.25 dB
  • Crosstalk (below rated power) : 20 Hz to 1 kHz > 80 dB
  • Common Mode Rejection :(20 Hz to 1 kHz) > 50 dB
  • Maximum Input Level before Compression +20dBu
  • Load Impedance : 70V, 100V (2-16 Ohms)
  • Voltage Gain (at maximum level settings) (8/4 ohm operation) : 35:1 (31 dB)
  • Power Draw at Idle (120VAC mains: standby mode) : 24W
  • Dimensions 3.5″ x 19″ x 14.25″
  • Weight :22.8lbs
  • Shipping Weight 27.7 lbs