Audiotel Scanlock M2- Radio Bug Detection System TSCM

Description

This is a used Scanlock M2- Radio Bug Detection System- The best piece of kit Audiotel ever produced. The unit has many accessories and comes in a Pelican 1600  Protector case, with the Peli internal padded divider set . The system is in great working order with one small issue. The sound output from the headphones & speaker is down a little. It is still perfectly usable. I would expect this small issue to be a pretty easy fix for Audiotel (UK) who still service this model.

Ships with:
Scanlock M2 UnitMains PSUMains Lead1 x Female N Type to Male N Type Lead1 x Male N Type to Male N Type Lead1 x N Type Female Barrel1 x N Type Telescopic Antenna Inductive Cable Clamp Test LeadHeadphonesProfessional Padded Shoulder StrapPeli Case with padded dividersInstruction Manual
When searching for active RF transmitter listening devices, speed is essential. If important meeting areas are under threat from electronic eavesdropping,minutes or even seconds could potentially be worth tens of thousands of pounds to an eavesdropper.The detection and location of illicit RF transmissions requires swift and silent action to identify and locate listening devices on the Radio Spectrum without alerting potential eavesdroppers to what is happening.Scanlock M2 makes the detection, identification and location of covert radio transmitters quicker and easier than ever before.Imagine how long it would take to manually tune a radio into every station on the FM bandwidth to identify what was transmitting at each frequency.With Scanlock M2 you can not only cover the whole FM bandwidth, but a 500 times wider bandwidth, all in less than 5 seconds.

Compact and portable, Scanlock M2 is easily transported and can be desk mountedfor continuous monitoring during meetings.
User BenefitsQuickly identifies and locates active RF transmittersSimplified presentation of complex informationCable checking function allows operator to check telephone and mains cables for listening devicesRecords identified legitimate signals,speeding up subsequent scans
Technical SpecificationFrequency range         Near DC to above 5GHz (Frequency response is in two bands near DC to 10MHz and 10MHz to above 5GHz)
Sensitivity Better than  -70dBm (Sensitivity defined as 10dB SNR for 1kHz tone measured in CCITT weighting filter, WBFM 50kHz pk-pk deviation, RF swept compression mode)
2nd order intercept      -2dBm (RF high gain, measured at 100MHz)                                    +60dBm (RF low gain, measured at 100MHz)
3rd order intercept       -13dBm (RF high gain, measured at 100MHz)                                    +39dBm (RF low gain, measured at 100MHz)
1dB compression        -20dBm(RF high gain, measured at 100MHz)                                   +10dBm (RF low gain, measured at 100MHz)IF rejection N/A
Spurious free              74dB (overall 2nd order spurious free dynamic range dynamic range measured at 100MHz)Dynamic range           8dB (overall dynamic range measured at 100MHz)
Scan rate                   under 5 seconds (Fixed compression, 10MHz to 5GHz, 100kHz fixed compression resolution)
Size                           312 x 70 x 252mm (W x H x D)
Weight                      4kg
Battery life                Typically 5 hours