Crown 280A 2-Input Dual 80W Power Amplifier

$199.00

This is a used item – normal wear and tear can be expected. It comes as pictured and with a power cord, nothing else is included.

1 in stock

SKU: Crown 280A Category:

Description

Product Overview

The Crown 180A, 280A, and 1160A are high-value amplifiers for commercial and industrial audio. They provide 4-ohm and constant-voltage outputs (70V and 100V). The amps are part of Crown’s Commercial Audio Series, which also includes mixers and mixer-amps. These low-cost units provide all necessary features in a simple building-block format. The sound system can be upgraded as a facility expands. For example, you can add more mixers for more inputs, or add more power amps (or mixer-amps) to handle more zones.

Product Details

  • Amplifiers : 280ASome applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions.The amplifiers vary in their number of inputs, number of outputs, and power range:
  • 180A has 1 input and one 80W power amplifier for single-zone systems.
  • 280A has 2 inputs and dual 80W power amplifiers for two-zone systems.
  • 1160A has 1 input and one 160W power amplifier for single-zone systems.Features:
  • 180A, 280A and 1160A have 1 or 2 inputs, 1 or 2 amplifier output channels.
  • Ideal for commercial and industrial use
  • Balanced Phoenix-type line inputs; touch-proofed screw-terminal speaker outputs
  • Advanced protection system includes output current limiting, DC protection, circuit breaker/fuse, and thermal protectionApplications :
  • Commercial Audio
  • Pro AudioFeatures:
  • – The 180A has one 80W power amplifier.
  • – Ideal for commercial and industrial use.
  • – Expandable by adding Crown Commercial Audio Series mixers or mixer-amplifiers.
  • – Balanced Phoenix-type inputs; touch-proof screw-terminal speaker outputs.Details :
  • Model : 280A
  • Product Type : Power Amplifier
  • Minimum guaranteed power into 4 ohms or 70V/100V output : 80W maximum power at 1 kHz with 0.5% THD
  • Frequency Reponse (at 1 watt from 4-ohm tap) : 70 Hz – 19 kHz +/– 1 dB
  • Frequency Response (at line out) : 20 Hz to 20 kHz +/–1 dB
  • Power Bandwidth (at 4-ohm tap, 2 dB below maxium 1 kHz power) : 50 Hz to 20 kHz with < 0.5% THD
  • Signal to Noise Ratio :85dB
  • DC Output Offset : < ±5 mV
  • Input Sensitivity : 800 mV
  • Input Impedance (nominal) :100 kilohms
  • Crosstalk : 70dB at 1kHz
  • Line Output Level (nominal) : 1V into 10 kilohms
  • Operating Temperature/Humidity : 0° C to 40° C at 95% relative humidity (non-condensing)
  • AC Line Voltages Available : 100V 50/60 Hz, 120V 60 Hz, 220V 50/60 Hz, 230V 50/60 Hz, 240V 50/60 Hz
  • Storage Temperature : –20 degrees C to 85 degrees C
  • Power Switch :Pushbutton on-off switch
  • Master Volume Controls : One per output channel
  • Power Indicator : Blue LED indicates power on
  • Presence Indicator : Green LEDRear Panel Controls and Connectors Specifications:
  • Reset Button : Resets the circuit breaker that protects the power supply
  • AC Power Inlet Detachable IEC
  • Auxiliary Power Input : 2-position terminal strip for 24 VDC (±10%)
  • Output VCA Connector : 4-pin Phoenix-type connector for two VCA control lines of +10 VDC and ground
  • Line Out Connector : One 3-pin balanced Phoenix-type connector
  • Amp Input Connector : 3-pin Phoenix-type, high-impedance balanced
  • Dimensions (H x D) : 19 inch (48.3 cm), 3.5 inches (8.9 cm) high, and 12.2 inches (31 cm)
  • Weight : 21.0 lbs (9.5 kg)Click Here For More Information And Download