Kramer PT-572HDCP DVI Line over Twisted Pair Receiver

Description

The PT-572HDCP is a twisted-pair receiver for DVI signals. The PT-571HDCP converts the DVI to twisted pair signal and the PT- 572HDCP converts the twisted pair signal back to a DVI signal.

Features

• Max. Data Rate – 1.65Gbps.
• HDTV Compatible.
• HDCP Compliant.
• System Range – Up to 90m (295ft) at SXGA, or up to 30m (98ft) at UXGA on shielded BCDGKat524 cable. Up to 90m (295ft) at SXGA, or up to 70m (230ft) at UXGA on shielded BC-DGKat623 cable. Up to 100m (330ft) at SXGA, or up to 80m (265ft) at UXGA on shielded BC-DGKat723 cable.
• Cable – Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer’s BC-DGKat524, BCDGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• EDID PassThru – Passes EDID/HDCP signals from source to display.
• Power Connect™ System – A single connection to the transmitter powers both units when the devices are within 150ft (50m) of each other.
• Ultra-Compact PicoTOOLS™ – 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.TECHNICAL SPECIFICATIONS</b.
• INPUTS: 1 RJ-45 connector.
• OUTPUTS: 1 DVI, 1.2Vpp on a DVI Molex 24- pin female connector, DDC signal 5Vpp (TTL).
• BANDWIDTH: Supports up to 1.65Gbps.
• POWER SOURCE: 12V DC, 250mA (transmitter and receiver together).
• DIMENSIONS: 6.2cm x 5.2cm x 2.4cm (2.4″ x 2.1″ x 1″) W, D, H.
• WEIGHT: 0.14kg (0.3lbs).