Description
Features:
- Beam current feedback for stable color reproduction and comb filter for improved luminance/chrominance separation
- 8-inch Trinitron CRT
- Component input (Y/R-Y/B-Y or RGB), Y/C input and composite inputs for convenience and versatility
- Pulse cross and Blue only modes
- AC or DC powered for field operation
- Accepts external sync and sync on green signal of an RGB input
- 19-inch EIA standard rack mountable (with optional MB-507)
- Compatible with NTSC, PAL, SECAM and NTSC4.43
- Black level stability is a very significant parameter in professional monitoring because of its importance in providing stable, accurate color reproduction. To achieve this stability, the PVM 8-inch series employs a beam current feedback circuit which stabilizes the CRT drive by checking the cathode current at low light signal levels. This effectively corrects the black level drift, giving stable color reproduction over a long period of time and compensation for changes in CRT characteristics.
- Y/C input is standard in the PVM 8-inch series so that luminance/chrominance video signals can be input to the monitor. This minimizes cross color/dot interferences and realizes high quality video pictures.
- The PVM-8041Q has external sync inputs so that they can be synchronized with other equipment fed with the same sync signal. These monitors can also accept sync on Green signals.
- The PVM-8041Q picture aspect ratio can be selected between 4:3 and 16:9 depending on the input signal
- In the Underscan mode, the picture size is reduced and the entire active picture is displayed on the monitor. This facility allows picture edges to be observed.
- With the H/V delay mode, both the horizontal and the vertical blanking ares can be displayed simultaneously for inspection of horizontal and vertical sync.
- The Blue only mode monochrome display allows easy VTR noise inspection and chroma/phase adjustment.
- Mode selection for Blue only, H/V delay, Underscan and External sync together with input selection can be operated from a custom-made selector when connected to the remote input with the supplied Mini DIN 8-pin connector. Tally on/off can also be controlled.
- As well as operating from an AC power source, the 8041Q can also be DC powered for field operation. The monitors can be operated from one or two NP-1B battery packs or a BP-90A battery pack with a DC-210 battery adaptor. When the battery becomes weak, the power LED starts blinking as a warning indication of low battery voltage.
- Bias and Gain control volumes are accessible on the front panel of the PVM-8041Q. Fine adjustment of white balance can be easily done from the front of the monitor while observing the screen.
- The PVM-8041Q is fully compatible with the three major TV standards; NTSC, PAL, and SECAM. NTSC 4:43 can be reproduced as well.
- PVM-8041Q employ a comb filter for improved luminance/chrominance separation. This reduces cross color interference and contributes to a higher resolution.
- For maximum convenience and versatility, the PVM-8041Q has component (Y/R-Y/B-Y or RGB) inputs. This enables direct connection with equipment such as a Camera Control Unit (CCU) or a Betacam SP VTR. This ensures high quality picture evaluation.
- CRT type: 9″ HR Trinitron Tube, visible picture, size 8″ measured diagonally, 70° deflection, AG pitch 0.5mm
- Frequency Response: 6.0MHz (-3.0dB)
- Composite: Loop-through BNC 1.0Vp-p, sync negative, Automatice 75 Ohms termination
- Y/C: Loop-through 4-pin mini DIN
- Audio power output: Monaural, 0.5W with built-in speaker
- RGB/Component: Phono -5dBu, high impedance
- External sync: Loop-through BNC 4Vp-p negative, Automatic 75 Ohms termination
- Normal scan: 6% overscan
- Underscan: 3% underscan
- Convergence: Central: 0.43mm (Typical), Corner: 0.53mm (Typical)
- Synchronization: AFC time constant 1.0 ms)
- Humidity: 0 to 90%
- Operating Temperature: 0 to 35°C (32°F to 95°F)
- Color Temperature: 6500K (D65)
- Color system: NTSC/PAL/SECAM/NTSC4.43 (automatically selected)
- Horizontal Resolution: 250 TV lines at center
- Aperture Correction: -4.0dBs to +6.0dB (at 3.0MHz)
- Storage Temperature: -10 to 40°C (14°F to 104°F)
- Speaker Out: 0.5W, 8 Ohms, monaural
- Video Signal System: EIA 525 lines, 60 fields/CCIR 625 lines, 50 fields (switching of EIA to CCIR or vice versa is automatically done)
- Picture Tube: 22cm (9-inch) HR Trinitron tube, visible picture size 19.7cm (8inch) measured diagonally, 70° deflection
- H Linearity: <7% (Typical)
- V Linearity: <7% (Typical)
- Raster size Stability: H: 1.0%, V: 1.5%
- AC: 120V*2 0.7 to 0.4A, 50/60Hz
- Y (luminance): 1Vp-p, sync negative, Automative 75 Ohms termination
- C (chrominance): NTSC: 0.286Vp-p, sync negative, Automatic 75 Ohms termination
- PAL: 0.3Vp-p, sync negative, Automatic 75 Ohms termination
- BNC R/R-Y: 0.7Vp-p, 75 Ohms
- Sync on Green/G/Y: Composite: 1Vp-p, sync neg, 75 OhmsNon-composite: 0.7Vp-p, 75 Ohms
- B/B-Y: 0.7Vp-p, 75 Ohms
- Tally: Mini DIN 8-pin
- Dimensions W x H x D: 8 5/8 x 8 5/8 x 14 inches
- Weight: 17lbs 3oz
- HV Regulation: 3.0% (Cut off to High light)
- Line B: Loop-through Phono -5dBu, high impedance
- Line A: Loop-through Phono -5dBu, high impedance
- AC: 120V*2 0.7 to 0.4A, 50/60Hz
- AC: 43W
- Composite: Loop-through BNC 1.0Vp-p, sync negative, Automatice 75 Ohms termination
- DC: 12V 3.7A
- DC: 40W
- DC: XLR 4-pin
Reviews
There are no reviews yet.